Gravity separation of fine itabirite iron ore using the Reflux Classifier – Part II – Establishing the underpinning partition surface

- Rodrigues, Armando F. D. V., Delboni Junior, Homero, Zhou, James, Galvin, Kevin P.

Effect of -1 mm particle size fraction on JPU permeability and granulation characterisation

- Singh, Tejbir, Mitra, Subhasish, Aladejebi, Tosin, O'Dea, Damien, Honeyands, Tom

Gravity separation of fine itabirite iron ore using the Reflux Classifier – Part I – Investigation of continuous steady state separations across a wide range of parameters

- Rodrigues, Armando F.d.V., Delboni Junior, Homero, Rodrigues, Otavia M.S, Zhou, James, Galvin, Kevin P.

Moisture/particle interactions under oscillatory motion: model development

- Ilic, D, Williams, K, Gurung, V, Lavrinec, A

Particle classification of iron ore sinter green bed mixtures by 3D X-ray microcomputed tomography and machine learning

- Tang, Kunning, Wang, Ying Da, Niu, Yufu, Honeyands, Tom A., O'Dea, Damien, Mostaghimi, Peyman, Armstrong, Ryan T., Knackstedt, Mark

Transforming iron ore processing – Simplifying the comminution and replacing reverse flotation with magnetic and gravity separation

- Rodrigues, Armando F. d. V., Junior, Homero Delboni, Silva, Klaydison, Zhou, James, Galvin, Kevin P., Filippov, Lev O.

Variation in Iron Ore Sinter Mineralogy with Changes in Basicity

- Honeyands, Tom, Nguyen, Thi Bang Tuyen, Pinson, David, Connolly, Paul R. J., Pownceby, Mark I., Manuel, James, Matthews, Leanne, Leedham, John, Singh, Tejbir, O'Dea, Damien P.

Automated optical image analysis of iron ore sinter

- Donskoi, Eugene, Hapugoda, Sarah, Manuel, James Robert, Poliakov, Andrei, Peterson, Michael John, Mali, Heinrich, Bückner, Birgit, Honeyands, Tom, Pownceby, Mark Ian

Effect of Temperature, Time, and Cooling Rate on the Mineralogy, Morphology, and Reducibility of Iron Ore Sinter Analogues

- Harvey, Tobin, Pownceby, Mark I., Chen, Jeff, Webster, Nathan A.S., Nguyen, Thi Bang Tuyen, Matthews, Leanne, O'Dea, Damien, Honeyands, Tom

Effect of temperature, time, and cooling rate on the mineralogy, morphology, and reducibility of iron ore sinter analogues

- Harvey, Tobin, Pownceby, Mark I., Chen, Jeff, Webster, Nathan A. S., Nguyen, Thi Bang Tuyen, Matthews, Leanne, O'Dea, Damien, Honeyands, Tom

Influence of mineralogy and pore structure on the reducibility and strength of iron ore sinter

- Harvey, Tobin

Novel jamming mechanism for dry separation of particles by density

- Kumar, D., Iveson, S. M., Galvin, K. P.

Sinter strength and pore structure development using analogue tests

- Harvey, Tobin, Honeyands, Tom, O'Dea, Damien, Evans, Geoffrey

Chemical interaction between basic sinter and Newman Blend Lump analogues

- Liu, X., Honeyands, T., Evans, G., Chen, J., O'Dea, D.

Development of design criteria for reducing wear in iron ore transfer chutes

- Ilic, Dusan

Experimental study on the physical properties of iron ore granules made from Australian iron ores

- Li, Chengzhi, Moreno-Atanasi, Roberto, O'Dea, Damien, Honeyands, Tom

Gravity separation in the REFLUX™ Classifier in the presence of slimes

- Carpenter, James L., Zhou, James, Iveson, Simon M., Galvin, Kevin P.

Dry separation using a fluidized Sink-Hole

- Kumar, D., Iveson, S. M., Galvin, K. P.

Modelling the stability of iron ore bulk cargoes during marine transport

- Chen, Wei, Roberts, Alan, Katterfeld, Andre, Wheeler, Craig

Study of vacuum dewatering on iron ore with coarse size fraction

- Guo, Jie, Williams, Ken, Honeyands, Tom, Gocer, Sultan, Oliveira, Dauter